Bamboo Rod Making Tools

The bronze cap iron is large and comfortable.  It is tensioned with a 1½" Brass spinwheel. Like our other Block Planes, the blade is adjusted with a captive nut for
precise control with minimal backlash. Blade on the Low Angle tool is bedded at 12°, the Standard Angle at 20°. Blades are ground with a 25° flat bevel.

This tool has an appealing feel in the hand and is a pleasure to use. It is versatile, of a convenient size, and cuts with the authority of 1½ pounds behind every stroke.
Useful for every sort of woodworking job, this tool will quickly become a favorite.   It comes with a (.003") rod maker's groove.
The Small Scraping Plane (5½" long with a 1-3/8" x 1/8" blade) is based on the Stanley 212, which is scarce today and brings high prices from collectors.  Bronze body
with (.003") rod maker's groove.  Used for removing enamel and final planing passes.  

  • -Genuine Bellinger planing forms are known for their quality, accuracy, and consistency.
  • -Made from 1.25” x .75” x 72” surface ground steel bars. Their size and length provide a stable 1.5" wide planing base.
  • -The 60 degree groove is precisely milled to enable a full range of taper adjustments.

This is a precision rod making tool for both the beginner and seasoned rodmaking veteran.

MADE IN THE U.S.A.

Width  -  1-1/2"

Height  -  1-1/4"

Adjustment screws
Push-pull type, 5" increments

Features
Dowel pins prevent twist, opposing adjustment srcews,
surface ground cold-rolled steel, 1-1/2" planing surface.
Straight or swelled taper.

Shipping (we will credit aat check out)
Free shipping anywhere in the U.S.
$200.00

Price includes
Lie-Nielsen's exclusive
rodmaker's groove (a $25
upgrade)
_______________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________
SOLD
OUT
Lie-Nielsen adjustable mouth block plane
Lie-Nielsen small bronze scraping plane
_______________________________________________________________________________________________________________________
Bellinger Planing Forms
$750.00
_______________________________________________________________________________________________________________________
Price includes Lie-Nielsen's exclusive rodmaker's groove (a $25 upgrade)
Includes Bellinger depth gauge, a $120 value.
Included "A" package:
-3.1" 3-jaw self-centering chuck
-Jacobs 3/8" tailstock drill chuck w/
key, #0 Morse arbor, #1 Morse arbor
with drawbolt
Distance between centers
17.00" (430 mm)

Hole through spindle
.405" (10 mm)

Length overall
32.25" (820 mm)

Width overall
8.75" (220 mm)

Height overall
8" (200 mm)

Motor
90 volt DC with electronic speed
control that accepts any incoming
current from 100VAC to 240 VAC,
50 Hz or 60 Hz.

Spindle speed range
0-2800 RPM continuously variable
by electronic speed control
Sherline 4400A package
$800.00
Sherline 4400A
Swelled butt forms by special order at no additional charge!
_______________________________________________________________________________________________________________________
Bellinger NEW!
"Little Giant"
roughing beveler
flutes. 60 degree cutting angle. Reversible
design doubles cutting life. Each side will
re-sharpening. Can be re-sharpened 3 times.
This is a "sneak peek" at the all new Bellinger "Little Giant"
roughing mill.  Now you can make perfect .200" untapered
bevels from 1/4" square strips in a single pass.  A second pass
will bring the tip strips down to rough dimensions.  Hook up your
shop-vac to the safety shield for virtually dust-free milling.
Bellinger "Little Giant"
$1,395.00
$60.00 actual shipping cost.
SOLD OUT